How Often to Replace Skateboard Bearings? (Beginner Tips)

How Often to Replace Skateboard Bearings? (Beginner Tips)

Skateboard bearings are one of the most important parts of a skateboard, and yet they are often overlooked. Many skateboarders don’t know how often to replace their bearings, and as a result, their skateboards don’t perform as well as they could. Bearings are relatively cheap and easy to replace, so there’s no excuse not to keep them in good shape. Here’s a quick guide on how often to replace your skateboard bearings.

In this article, we will take a look, How often to replace skateboard bearings.

How Often to Replace Skateboard Bearings:

Skateboard bearings are one of the most important parts of the skateboard, and replacing them is essential to keeping your ride smooth. But how often should you replace your bearings?

The answer depends on a few factors, including how often you skate and what kind of terrain you skate on. If you’re a casual skater who only hits the pavement once in a while, you can probably get away with replacing your bearings every few months or so. But if you’re an avid skater who hits the streets or skate park daily, you’ll need to replace your bearings more frequently – about every month or two.

skateboard bearings

The type of terrain you skate on also makes a difference. If you stick to smooth surfaces like concrete or asphalt, your bearings will last longer than if you’re constantly skating over rough surfaces like dirt or gravel. To get the most out of your bearings, be sure to skate them in properly before you hit the streets.

The Main Factors to Consider While Replacing Skateboard Bearings:

The main factor is how much you use your skateboard. If you use it every day, then you should replace your bearings every couple of months. However, if you only use them occasionally, then you can get away with replacing them once a year.

The other factor to consider is the type of terrain you’re skating on. If you’re skating on rough surfaces, then you’ll need to replace your bearings more frequently than if you’re skating on smooth surfaces.

How to Tell if Bearings Need to Be Replaced:

Skateboard bearings are one of the most important parts of the skateboard, and yet they are often overlooked. Many people don’t know how to tell when their bearings need to be replaced. Here are a few signs that it might be time to get new bearings:

1. Your skateboard is making strange noises. If your bearings start to make grinding or squeaking noises, it’s time for new ones.

2. Your skateboard is slower than usual. Dirty or damaged bearings can cause your skateboard to slow down significantly.

3. You can see damage on the bearings themselves. If the bearing races are cracked or damaged, they need to be replaced.

If you notice any of these signs, it’s time to replace your bearings. Skateboard bearings should be replaced every few months to keep your skateboard running smoothly.

Reasons for Replacing Bearings:

If you’re a skateboarder, then you know that bearings are an important part of your board. Bearings help your wheels spin and make skating possible. But how often should you replace them? Here are a few reasons why you might need to replace your bearings:

Photo of steel skateboard bearings

1. If your bearings are making noise, it’s probably time for new ones. Noisy bearings can be a sign that they’re worn out or dirty.

2. If your bearings feel rough when you spin them, that’s another sign that they need to be replaced. Smooth, fast spinning is what you want from your bearings.

3. If your skateboard starts to vibrate or wobble, it could be a sign of loose or damaged bearings. This is definitely something you want to fix before riding again.

4. Looser bearings can cause your wheels to pop out of place and make it harder for you to ride.

How To Replace Skateboard Bearings:

Skateboard bearings are one of the most important parts of a skateboard, and if they are not maintained, they can cause the rider to have a less-than-ideal experience. Fortunately, replacing bearings is not difficult, and only takes a few minutes. Here is a step-by-step guide on how to replace skateboard bearings.

1. First, you will need to purchase new bearings. There are many brands and types of bearings available, so do some research to find the best option for you.

2. Next, remove the old bearings from your skateboard. To do this, simply pop out the old bearing using a screwdriver or other tool.

3. Once the old bearing is removed, clean out the bearing seat with a rag or brush to remove any dirt or debris.

4. Now, place the new bearings in the skateboard and replace the spacers or washers that were removed to make room for them.

5. Once you have placed all of the new bearings into the skateboard, you can now re-assemble your wheels back onto your board. Front wheels must be reassembled with the bearings from the inside of the skateboard, and the back wheels must be reassembled with the bearings from the outside of the skateboard.

6. Extend your skateboard and make sure that you have the wheels on straight. If you do not have the wheel on straight, it will wobble.

7. Now, re-tighten your axle nuts to secure the bearings and wheel assembly into place.

By following these steps you will easily replace the skateboard bearing.

Conclusion:

In conclusion, it is important to know how often to replace your skateboard bearings. Depending on how often you skate, you will need to replace them anywhere from once a month to once a year. If you take care of your bearings and keep them clean, they will last longer. So, go out and enjoy skating with new, fresh bearings!


Share post on


Boarding Vela is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Social Links

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran

Latest Posts

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran