How to Make Your Skateboard Faster? (5 Minute Read)

Skateboard Gear and Specs If you’re looking for a faster skateboard, the first thing you should think about is your equipment. The gear on your board is one of the biggest factors in how fast it can go. Skateboard wheels are the biggest factor in how fast you can skate. If a wheel is smaller, it will be much faster than a bigger wheel. Most professional longboarders ride wheels between 64 and 75 millimeters, but there is no single wheel size for speed.

There are a few reasons you might want a faster skateboard. If you’re using your skateboard to commute, a faster board can get you where you’re going quicker. Or, if you’re looking to do tricks and need more speed to complete them, a faster skateboard can help with that too. Whatever your reason for wanting a faster board, there are a few things you can do to increase your speed.

Things That Make Skateboard Faster:

1) Wheels:

When it comes to making your skateboard faster, the size and hardness of your wheels play a big role. Softer wheels are great for absorbing vibrations and bumps in the road, which can help you go faster. Harder wheels are better for grip and stability, helping you maintain your speed.

The right size wheel for you will depend on the kind of skating you’re doing. If you’re mostly street skating, smaller wheels are better for maneuverability. If you’re mostly skating ramps or bowls, larger wheels are better for stability and speed. Bearings are a good fit for your skateboard trucks.

2) Bearings:

Bearings are what allow your wheels to spin freely, so they’re very important! Good bearings will make it easier to keep your skateboard rolling smoothly down the road.

Hardness is another important factor to consider. Softer wheels provide better grip on rough surfaces, but they also wear down more quickly. Harder wheels are faster and longer lasting, but they can be more difficult to control. Ultimately, it’s up to you to experiment with different wheel combinations to find what works best for you.

Skateboard bearings are one of the most important parts of the skateboard, and keeping them clean and well-maintained is essential to keeping your skateboard running smoothly. Here are some tips on how to clean and maintain your bearings:

  • 1. Use a brush or toothpick to remove any dirt or debris from the bearing.
  • 2. Rinse the bearings with water and dry them off completely.
  • 3. Use a drop of oil ( WD-40 works well) on each bearing, being sure not to over-oil them.
  • 4. Spin the wheels to distribute the oil evenly, then wipe off any excess oil with a rag.
  • 5. Reassemble your skateboard and you’re good to go!

3) Trucks:

There is a lot that goes into making your skateboard faster. One of the most important things is choosing the right width and kingpin. The width of your trucks should be proportional to the width of your deck. The kingpin is the part of the truck that connects to the baseplate.

It is responsible for keeping the wheels in place and providing stability. A wider truck will provide more stability, but a narrower truck will be easier to maneuver. The kingpin also plays a role in stability. A taller kingpin will make the board more stable, but it will also make it harder to turn.

You want to find a balance between these two factors to get the best performance out of your skateboard. A skateboard deck is made up of curved layers of wood that are stacked together and glued at the edges. You can think of it like a deck of cards, where the layers are stacked on top of each other.

4) Bushings:

There are a few things to consider when choosing the right durometer for your bushings. The first is the hardness of the bushing. A harder bushing will be faster, but less forgiving on rough terrain. A softer bushing will be slower but provide a smoother ride.

The second thing to consider is the weight of the rider. Heavier riders will need a harder bushing to prevent their weight from bottoming out the suspension, while lighter riders can get away with a softer bushing. The last thing to consider is the terrain you’ll be riding on.

Harder bushings are better for smooth surfaces like concrete, while softer bushings perform better on rougher surfaces like asphalt or dirt.

When it comes to choosing the right durometer for your bushings, there are a few things you’ll need to take into consideration. The first thing to consider is the weight of the rider.

Heavier riders will need a harder bushing to prevent their weight from bottoming out the suspension, while lighter riders can get away with a softer bushing. The second thing to consider is the weight of the rider.

How Can I Make My Skateboarding More Efficient?

If you’re looking to make your skateboarding more efficient, here are a few tips to follow. First, make sure you have the right equipment. A good skateboard should be lightweight and have good trucks and wheels. second, practice your technique.

Make sure you’re using your body weight to push off the ground and that you’re keeping your feet close to the board. Third, keep your skating surface clean and smooth. This will help you move faster and prevent any unexpected stops or falls. fourth, warm up before skating.

Skating takes a lot of energy and can be tough on your muscles, so it’s important to warm up before hitting the streets. Finally, enjoy yourself! Skating is supposed to be fun, so don’t take it too seriously. Remember to relax and have a good time.

What are Some Tips On How to Make My Skateboard Faster?

If you want to make your skateboard faster, there are a few things you can do. First, make sure your wheels are properly inflated – this will help them to roll more quickly.

You can also try changing your wheel size – larger wheels will usually make your skateboard faster. Finally, consider the surface you’re skating on – a smooth, hard surface will allow you to go faster than a rough or uneven one. With these tips in mind, you should be able to make your skateboard fly!

Conclusion:

After you have followed the above tips on how to make your skateboard faster, it is important to test out your new setup to ensure that it is working as expected. To do this, find a flat, smooth stretch of pavement or concrete and ride your skateboard at a moderate speed.

If everything feels good and your skateboard is responding well, then you are ready to take it for a spin on your favorite skating spot!


Share post on


Boarding Vela is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Social Links

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran

Latest Posts

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran