How to push on a skateboard? A step by step guide for 2022

How to push on a skateboard? A step by step guide for 2022

Are you looking for how to push on a Skateboard? Then you are at the right place.

A proper push-off technique allows skateboarders to get moving and then pick up speed quickly.

Skateboarding is the first thing you must learn if you’ve not skated before.

Let’s say that you’re an inexperienced skater who enjoys skating. You have bought a skateboard, but you’re not sure of anything. The first skill you’ll need to master is how your skateboard move.

Pushing is the first motion-based move you’ll master on the Skateboard. The back foot will give you both speed and control as it pushes away from the ground’s surface. 

This should be something you do quickly, but understanding the basics regarding balance and stance can help you learn how to push more accessible and efficient. This is why we’ve put together a short guide.

How to push on a Skateboard?

how to push on a skateboard

New skaters need to determine how they’ll ride by putting their feet on the right or left facing forward.

The natural position can be the best position to ride in. In other words, you’re either a regular or a giddy-footed skateboarder.

Types of How to push on a skateboard

There are two types of how to push on a skateboard. Goofy & Regular

Goofy

You stand on the Skateboard by placing your left foot over bolts on the front and your left hand to the rear. If you are riding sloppy, you’ll be pushing using the left side of your foot. The left side of your foot will be the dominant foot.

Regular

Your Skateboard is positioned using your left hand on bolts in front while your other foot is on the board’s tail. If you’re a frequent skater, you will push using the right side of your foot. It is your primary foot.

If you’re unsure whether you should be riding regular or goofy, get in the middle of your board, and do a few pushes. Choose the one that feels most natural.

Get in a proper Stance to push on your Skateboard.

pushing skateboard

First, take on your fun or standard skateboard position. Be sure to place one foot in front of the bolts in front while your rear foot is resting on the back of the board. Once you’re at ease, you can bend your knees so gently. It should feel like you can spring up and down if you wish to.

You don’t want to be in a rigid stance. Make sure your limbs are loose and flexible.

Check out videos of surfers and skateboarders. They always appear loose, fluid and without stress. Good skaters never ride in a stiff stance. Being stiff can be an injury-causing factor.

Don’t ever push mongo. It’s a bad habit to fall into at a young age and difficult to stop after long enough.

What is Mango?

Pushing mongo occurs when you push your front foot while keeping your foot near the edge of the Skateboard.

Major Key factors of How to push on a Skateboard

Some significant factors determine how to push on a skateboard.

1. Stance

2. Foot Position

3. Turning

4. Riding

5. Stopping

Stance

stance position on a skateboard

It’s the most significant aspect of skateboarding. It’s the initial step to skating. Therefore, crucial to be able to master this skill!

There are two positions or methods to stand and push your board. They are both ordinary and fun. No one stance makes you a “better” skater. It’s all about what feels comfortable for you. The definitions of each are listed below.

  • Regular is the left foot you are pushing forward, and you’re pushing with your right foot.
  • Goofy happens when you’re putting your left foot forward and pushing using your left foot.

Foot Position

foot position on a skateboard

Once you’ve mastered the two positions and the two stances, let us determine which one you’re in. Imagine running and sliding across the ice or on something slippery.

What foot would you place forward? If you had in the position of kicking a soccer ball which one would you use to kick it? If you answer left, you’re normal, and if it’s correct, you’re a goof. You’ve got it right!

Once you’ve got your stance in place, Let’s take a look at the direction your feet should be. Your front foot should be right below the front bolts, about 1/3 to the length of the board. Your back foot will be on the tail, making it easy to transition into tricks while riding.

When pushing, it’s a bit different. It’s very like walking. In the beginning, it is best to walk over the board and then continue walking. Make sure you are putting one foot in front of the board and pushing the back of your foot.

If you’re pushing your front foot, it’s in front for the best stabilization and stability. If you stop pushing, your back foot is back to the side of the board, as your front foot pivots to the right and then through the board, in the direction of your body.

This tiny motion of switching between two directions isn’t easy to get used to. Make sure you practice this slowly and gradually increase the speed from there. Check out the image below for a reference.

Best method of Pushing

The best method to push is using the back of your foot. At first, you might want to push using one foot in front. This is referred to as push “mongo”. The mongo push isn’t the most pleasant, and it doesn’t feel solid. Learn to push in the correct way using your back foot as you begin to learn.

Once you’ve got it down, Start pushing and jogging around your neighbourhood. If you feel that something isn’t right, take it slow and make sure that the previous steps are followed. It’s essential to make sure this is not a problem in the future.

Turning

The next step involves turning. There are two simple ways to turn while you’re skating. The first is to move your body. This is known as “carving turn. If you are leaning more towards the left, then the more you’ll begin moving to the left and reverse.

turning on a skateboard

Be sure to have a good balance. If not, the balance will become apparent as you progress in skating. Consider it an exercise step.

Next, you’ll need to do called “Kick Turn. The process involves slightly leaning forward, lifting your front wheels, and then pointing towards the direction you want to take. Applying pressure to the back trucks is necessary to get the board a bit.

When turning, you must determine where you’d like to move. This is connected with becoming comfortable with your board and riding around. While turning, stay conscious of your surroundings to ensure you don’t end up riding into anything or someone.

Riding

riding on a skateboard

Once you’ve learned how to turn and push and turn, you’re ready to move on to the most enjoyable part, riding! It’s a lot of fun, so it’s crucial to learn this. Spend lots of time on the road and riding through the day.

We often say, take a ride to the shop for work or school. Ride everywhere. To become comfortable on your board, you need to take it through all terrain. This will make you accustomed to the board.

It’s hard to stress this point enough. The ability to move around on your board will make all the difference once you begin learning tricks. If you’re uncomfortable on your board or riding, it will be more difficult to master these skills.

Stopping

If you’ve been on the road for a while, it’s essential to understand what to do to get off. There are numerous methods to stop. The two most commonly used include the power slide or dragging your foot across the floor. Power slides can be more complex and could consume the wheels. It’s helpful to know when you’re very rapid. But it’s not necessarily the subject of another tutorial.

The most effective way for stopping is to set your back foot on the ground and let it slide. Once you’ve reached a comfortable pace, step the back foot so that you’re not moving continuously. That’s the most efficient method of stopping. This will be enough to keep you out and about!

Here are the fundamentals of riding and pushing! If you’re beginning to learn about skateboarding, it’s the first sequence of steps you’ll require to learn. Think of riding and pushing like Trick 0. This is the first thing you’ll learn. It’s also going to be an exciting experience since you’re beginning this exciting journey. We’re excited to follow closely with you!

Some Useful Tips on how to push on a skateboard

1. Keep your Skateboard right in the direction of you. All four wheels must be able to roll once you take your first step.

2. Put your dominant foot on the top of the boards (the front) close to the trucks in the front.

3. The front knee should be bent slightly while leaning towards the forward.

4. Relax your knees and lift them off the floor using your back foot.

5. When the Skateboard starts to roll, place your rear foot back onto the Skateboard in an easy motion.

How to Roll Over Cracks without Falling Off the Board

roll over cracks on a skateboard

 When you’re on your Skateboard, there are various other dangers such as pebbles and cracks. These hazards could cause you to fall off your board now and then. However, hopefully, you’ve read this before it occurs.

When you come across a small crack rock or anything else that could be blocking your path, sure, it has to be tiny – do this:

1. Place your back foot onto the back of the Skateboard. Bend your knees.

2. Use just enough pressure or weight to the tail to raise the wheels. They should only barely lift off the ground.

3. When you have cleared your wheels from the obstruction, Move your weight closer to the front of the board.

Pro Tip For you

To ensure you’ve cleared the obstacle, you can put your feet on both sides of the front with your trail foot in the rear when you’re approaching. After your front wheels have cleared the obstacle, you can place weight on the nose and allow the rear wheels to get rid of the obstacle.

Conclusion

In this article, we tried to show you some key factors and tips on how to push on a skateboard. These tips and guides are well researched and experienced base, and all the tips are handy if you are a beginner and trying to push your Skateboard for the first time. So now we hope you learn some tips about pushing on a skateboard so let’s start your journey!


Share post on
John Lashley
By John Lashley

I am John Lashley from United States. Content writer at Boarding Vela. I’m bored sports enthusiast. I’ve been skateboarding streets since I was about 10. Also I’ve experimented with longboarding & downhill. As to this site my goal is to help beginner riders to find the right equipment and everything about Skateboarding. Everything that I write here is my own opinion



Boarding Vela is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Social Links

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran

Latest Posts

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran