How To Remove Old Grip Tape From Skateboard?

How To Remove Old Grip Tape From Skateboard?

Grip tape is a vital part of any skateboard, providing much-needed traction between the rider’s feet and the deck. Over time, grip tape will begin to wear down and lose its effectiveness. When this happens, it’s important to remove the old grip tape and replace it with new grip tape.

Removing old grip tape can be a bit of a challenge, as it’s often quite stubborn. But with a little patience and the right technique, you’ll be able to get that old grip tape off in no time. In this article, we will take a look at how to remove old grip tape from skateboards.

How To Remove Old Grip Tape?

If your skateboard’s grip tape is looking a little worse for wear, it might be time to remove it and replace it with fresh tape. Here’s how to do it:

1. Start by peeling up one end of the grip tape. Use your fingers or a blunt object like a butter knife to get under the edge of the tape and slowly lift it up.

2. Once you’ve got a corner lifted, start pulling the tape off in strips. If the strip tears, just start over at the lifted corner and work your way around again.

3. Once all the old grip tape has been removed, use a solvent like Goo Gone or acetone to remove any sticky residue from the deck. Wipe it down with a clean cloth and you’re ready to apply new grip tape.

The Importance of Removing Old Grip Tap:

Most skateboarders go through a lot of grip tape. It’s one of those things that you have to replace often because it gets dirty and worn down with use. But did you know that old grip tape can actually be damaging to your skateboard?

That’s right, the adhesive on grip tape can break down over time and start to eat away at the top layer of your deck. This can cause delamination and weaken the structure of your board, making it more susceptible to breaking.

So, if you’re still riding on that old piece of grip tape, it’s time to replace it! Not only will it help keep your deck in good condition, but you’ll also get a better grip on your board, which is always a good thing.

If you’re looking for a deck that will have you doing the most work and is made to be ridden hard, we recommend checking out our selection of bamboo skateboards. Bamboo is a very strong material that also has great flexibility. Bamboo decks will have less of a chance of breaking, so they’re great for both beginners and experts alike.

Why You Should Replace Your Grip Tape:

Most people don’t know that grip tape has a shelf life. Grip tape dries out over time and loses its stickiness. This can cause your feet to slip while riding your skateboard. You may not think it’s a big deal, but it can be dangerous. A fall could cause serious injury.

It’s easy to replace your grip tape. You can do it yourself in a few minutes. Just make sure you buy the right size for your skateboard. You can find grip tape at most stores that sell skateboarding gear.

Don’t risk riding your skateboard with old, dried-out grip tape. Replace it regularly to keep yourself safe.

Contour grip tape is a high-quality grip tape that is most popular with our customers. Contour grip tape is made from a special type of PVC plastic that provides increased traction in all directions. This means you will have better control over your skateboard.

How To Choose The Right Grip Tape For Your Skateboard:

Old grip tape can be a pain to remove, but with the help of a few common household items, it can be done relatively easily. All you need is some boiling water, a razor blade, and patience.

First, Boil a pot of water and pour it onto the grip tape. Let it sit for a few minutes until the adhesive softens. Next, take your razor blade and slowly start peeling the tape away from the board, being careful not to damage the wood. Once most of the tape is removed, use a rough cloth to scrub away any remaining residue.

This can be difficult, so take your time. Once the grip tape is removed, you will want to sand down any rough spots on the board that may still have laces or excess adhesive. This is to ensure that your new grip tape sticks firmly to the board.

Now, apply your grip tape. The best way to do this is to clean the board with some rubbing alcohol and let it dry completely. Then lay out a sheet of grip tape and cut it to the size of your deck.

Conclusion:

When it comes to removing old grip tape from a skateboard, there are a few things you need to keep in mind. Of course, if you’re not comfortable removing the skateboard grip tape yourself, you may want to find a local skate shop that can do it for you. Skateboarding is an exciting hobby that can help people stay fit and active while having fun.


Share post on


Boarding Vela is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Social Links

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran

Latest Posts

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran