How To Remove Rust From Skateboard Bearings? (Easy Methods)

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your skateboard in good condition. A key part of your skateboard is the bearings. The bearings allow your wheels to rotate smoothly. 

Over time, however, the bearings can become rusty. This can cause your skateboard to slow down and not work as well. Thankfully, there are ways to remove rust from your skateboard bearings.

In this article, we will take a look at how to remove rust from skateboard bearings in some easy methods.

Things You Need to Remove Rust from Skateboard:

If your skateboard bearings are rusty, don’t worry! With a little time and the right materials, you can get them looking like new again. Here’s what you need:

  • Rubber gloves
  • A small brush (toothbrush size)
  • Rust removal gel or spray
  • White vinegar
  • A clean rag

How to Remove Rust From Skateboard Bearings:

Here are a few steps to remove rust from skateboard bearings:

Step 1: Remove the Bearings:

If you’re trying to remove a stuck bearing from a skateboard wheel, the first thing you’ll need to do is remove the axle nut and washer. To do this, you’ll need a skate tool or a regular wrench. Once the nut and washer are removed, you should be able to pull the bearing out of the wheel. If the bearing is still stuck, you can try using a bearing separator tool.

This will exert a little extra force to remove the bearing. If you don’t have a bearing separator tool, you can use a flathead screwdriver for the same purpose. Just be sure to take your time and not scratch the wheel or bearing.

Step 2: Clean The Bearings With A Solvent:

If your skateboard bearings are rusty, don’t worry–you can easily clean them up at home. Here’s what you need to do:

First, remove the bearings from the skateboard. Next, clean the bearings with a solvent, such as WD-40 or rubbing alcohol. After the bearings are clean, dry them off with a clean cloth.

Step 3: Lubricate The Bearings:

Lubricating your bearings is an important part of maintaining your skateboard. It will help keep them running smoothly and prevent rust and corrosion. Here are the steps to properly lubricate your bearings:

1. Remove the wheels from the skateboard.

2. Using a bearing lube, apply a small amount of lube to each bearing.

3. Put the wheels back on the skateboard and spin them to spread the lube around.

4. Wipe off any excess lube with a clean cloth.

Step 4: Reassemble the Bearings:

Here is a step-by-step guide on how to reassemble the skateboard bearings.

1. Start by putting the bearing onto the axle.

2. Then, put the spacer on top of the bearing.

3. Next, put the second bearing on top of the first one. Make sure that the bearings are facing the same direction.

4. After that, put the second axle on top of the second bearing.

5. Finally, you need to place the wheel and the nut on top of the axle. The wheel should be on top of the bearings before putting on the nut.

How Can I Prevent Rust From Affecting My Skateboard Bearings?

Although bearings are made of metal and therefore susceptible to rust, there are ways to prevent this from happening. The first step is to keep your bearings clean. This means wiping them down after each use and making sure they are free of dirt and debris. You can also use a bearing lubricant to help keep them in good condition.

Another way to prevent rust is to store your bearings properly. This means keeping them in a dry, cool place away from moisture and humidity. You can also put them in a sealable bag or container to further protect them from the elements.

By taking these simple steps, you can help extend the life of your skateboard bearings and keep them functioning properly for longer.

Conclusion:

Skateboard bearings are exposed to the elements and can easily become corroded. Rust can build up on the bearing surface and cause the bearings to seize up. Regular cleaning with a mild soap and water solution will remove any dirt or grime that has accumulated on the bearing surface.

Once the bearings are clean, they should be lubricated with light oil or grease. This will help to protect the bearings from corrosion and keep them running smoothly.


Share post on


Boarding Vela is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Social Links

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran
How To Remove Old Grip Tape From Skateboard? BLOG

How To Remove Old Grip Tape From Skateboard?

Grip tape is a vital part of any skateboard, providing much-needed traction between the...

By Sammy Ekaran

Latest Posts

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran