What to Do if Your Skateboard Turns its Own?

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the chagrin of their owners. This phenomenon, while seemingly innocuous, can actually be quite dangerous. If you’re a skateboarder, it’s important to know what to do if your board turns on its own.

First and foremost, don’t panic. It may seem like your board is possessed, but rest assured that it’s not. Skateboards are powered by a variety of electronic components, including sensors and motors. These components can malfunction, causing the board to turn on without warning.

If your skateboard turns on its own, the best course of action is to immediately power it off. Once the board is off, inspect it for any damage or lose connections. Once you’ve determined that the board is in good working condition, you can try powering it back on. In this article, we will take a look at what to do if your skateboard turns it’s own.

Why Does This Happen?

There are a few reasons your skateboard might turn on its own. First, check to see if the batteries in your remote are fresh. If they’re not, that’s likely the issue- simply replace them and you should be good to go. 

If the batteries are new but your board is still misbehaving, it could be a loose wire or connection issue. Try tightening any loose screws on the board and make sure the wires are all securely connected.

 If that doesn’t do the trick, you may need to recalibrate your board using the manufacturer’s instructions.

1) Skateboard Technology

When it comes to skateboard technology, there are a few things you should know. First and foremost, if your skateboard turns on its own, it’s probably time for a new one.

 Skateboards these days are equipped with sensors that allow them to automatically turn on when they detect movement. So if your board is turning on by itself, it’s likely because the sensor is faulty.

Another thing to keep in mind is that the weight of the rider has a big impact on how the skateboard performs. Heavier riders will cause the board to flex more, which can lead to instability and loss of control.

 Conversely, lighter riders may find that their boards are too stiff and don’t have enough give. The best way to find out what weight works best for you is to experiment with different boards until you find one that feels just right.

2) Manufacturing Faults

Most skateboarders know what it’s like to have a board that just doesn’t feel right. It could be that the trucks are loose, the wheels are wobbly, or the deck is warped. These are all manufacturing faults that can happen during the production process, and they can be frustrating for riders.

Unfortunately, there’s not much you can do about manufacturing faults once you’ve bought the skateboard. The best thing to do is to take it back to the store where you bought it and ask for a replacement or refund. If you bought the skateboard online, you may have to contact the company directly to arrange a return.

It can be disappointing to get a faulty skateboard, but remember that it’s not your fault – these things happen!

How To Prevent It From Happening Again

If your skateboard suddenly turns on its own, there are a few things you can do to prevent it from happening again. First, make sure that the batteries in your remote are fresh and properly installed. 

Second, check the wheels and make sure they’re not loose. Finally, if you’re still having trouble, take your skateboard to a professional for a tune-up. 

With a little bit of care and attention, you can keep your skateboard running smoothly for years to come.

1) Inspection before riding

Before you start riding your skateboard, it is important to inspect it to make sure everything is in working order. This includes checking the wheels, trucks, and bearings.

The wheels are the most important part of the skateboard, so you want to make sure they are not cracked or damaged in any way. The trucks should be tight and not wobbly. The bearings should be lubricated and not dry or rusty.

If everything looks good, then you are ready to start skating! But if something is wrong with your skateboard, it is best to fix it before you ride. Otherwise, you could end up injuring yourself.

2) Maintenance

When it comes to skateboards, maintenance is key. Without proper care, your skateboard can quickly become damaged and unusable. Here are a few tips on how to keep your skateboard in top condition:

First, always inspect your skateboard before riding it. Check for cracks or loose parts that could cause you to lose control while riding.

Second, make sure to clean your board regularly, especially if you ride it in dirt or gravel. A clean board will slide better and be less likely to get damaged.

Finally, don’t forget to lubricate your bearings every few weeks. This will help them spin smoothly and prolong the life of your skateboard.

By following these simple tips, you can keep your skateboard in good condition for years to come.

What To Do If It Happens While You’re Skating

If you’re skating and your skateboard suddenly turns on its own, don’t panic! Here’s what to do:

1) Stay calm

If your skateboard turns on its own, don’t panic! Here are a few things you can do to stay calm and keep skating:

1. Take a deep breath and relax. It might seem like your board is out of control, but remember that you’re the one in charge.

2. Stay focused and concentrate on what you’re doing. If you start to feel panicked, it will be harder to stay in control of your board.

3. Remember that falling isn’t the worst thing that could happen. If you do fall, get back up and try again. The more times you practice, the better you’ll get at staying calm under pressure.

2) Don’t try to fight it

When your skateboard starts turning on its own, the best thing you can do is not fight it. This may seem counterintuitive, but if you try to fight the board, you’ll only end up exhausting yourself and making the situation worse.

Instead, go with the flow and let the board do its thing. It might take a little practice, but eventually, you’ll be able to control the board and make it do what you want.

What To Do After It Happens

After your skateboard turns on its own, there are a few things you can do to fix the problem. First, try resetting the board by turning it off and then on again.

If that doesn’t work, you may need to recalibrate the sensors. Also here are things to do:

Check for damage

If your skateboard turns on its own, the first thing you should do is check for damage. Look for cracks or splits in the deck, missing or damaged wheels, and loose or broken trucks. If you find any damage, replace the parts as soon as possible.

Next, check your bearings and make sure they are properly lubricated. if they are dry or rusty, replace them with new ones. Also, make sure the axle nuts are tight and that the kingpin bolt is not loose.

Finally, inspect the deck for warping or water damage. If it is warped, it will need to be replaced. If it is water damaged, you can try to dry it out and see if it returns to its original shape. If not, you will need to buy a new deck.

Conclusion: 

If your skateboard starts moving on its own, there are a few things you can do to stop it. First, try to push it with your foot. If that doesn’t work, you can try to grab the back of the board and slow it down that way. If neither of those methods works, you can try to jump off the board and let it go. Finally, if none of those options work, you can just wait for the skateboard to stop on its own.


Share post on


Boarding Vela is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Social Links

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran
How To Remove Old Grip Tape From Skateboard? BLOG

How To Remove Old Grip Tape From Skateboard?

Grip tape is a vital part of any skateboard, providing much-needed traction between the...

By Sammy Ekaran

Latest Posts

Can Skateboarding Cause Lower Back Pain BLOG

Can Skateboarding Cause Lower Back Pain

Skateboarding is a popular activity among adolescents and young adults, but it is also...

By Sammy Ekaran
What is The Difference Between A Pro Skateboard and A Beginner Skateboard? BLOG

What is The Difference Between A Pro Skateboard and A Beginner Skateboard?

When a person is first starting to skateboard, they may not know the difference...

By Sammy Ekaran
What to Do if Your Skateboard Turns its Own? BLOG

What to Do if Your Skateboard Turns its Own?

In the past decade, skateboards have been turning on their own, much to the...

By Sammy Ekaran
How To Remove The Wheel Locks On A Skateboard With A Drill? BLOG

How To Remove The Wheel Locks On A Skateboard With A Drill?

If you've ever been skateboarding, you know that one of the most annoying things...

By Sammy Ekaran
What Is Skateboarding Learning? BLOG

What Is Skateboarding Learning?

Skateboarding is a unique sport that can be enjoyed by people of all ages....

By Sammy Ekaran
How To Remove Stuck Bearings From Skateboard? BLOG

How To Remove Stuck Bearings From Skateboard?

If you're a skateboarder, you know that one of the most frustrating things that...

By Sammy Ekaran
How To Remove Rust From Skateboard Bearings? (Easy Methods) BLOG

How To Remove Rust From Skateboard Bearings? (Easy Methods)

If you are a skateboarder, you know how important it is to keep your...

By Sammy Ekaran
How to Remove the Truck From Skateboard? (Easiest Methods) BLOG

How to Remove the Truck From Skateboard? (Easiest Methods)

A skateboard is a short board that typically measures 28-32 inches long and 7-10...

By Sammy Ekaran